Adding the steering column cover was pretty straight forward. I needed to trim the edges off, and drill two holes at the top to hold it in place.
Other than that, the stock mounting locations were used.
Fiero dash – added lower steering column cover
Adding the steering column cover was pretty straight forward. I needed to trim the edges off, and drill two holes at the top to hold it in place.
Other than that, the stock mounting locations were used.
Comments
You should make a video.
How long did the process take you?
The entire process, from start to were it is now (upholstered) took about 3 months of work. There is a lot of fabrication needed.