I have completed the installation of the HVAC system. The 2.5″ SHOP-VAC tubing was used to run the air-flow, and a plate (made of fiberglass) was fabricated – this allowed the tubes to mount to the stock HVAC outlet. This was a time consuming modification – 6.5 hours total.
It took me a while to think of how I was going to keep the glove box door secured during driving. The solution was simple – VELCRO.
It took a while for me to think about how I was going to mount the glove box door. I found a set of 1″ brass hinges (at Canadian Tire) that were small enough to be hidden, …but big enough to provide support strength. The brackets required a notch to be cut out – this …
After the fiberglass cured, I pulled off the duct-tape and trimmed the edges. It will require a little more sanding and body-filler to finish, …but I’m quite pleased with how it turned out.
I decided to fix the dash gap with fiberglass, rather than rely on upholstery to cover up the misalignment. Duct-tape was used to form the shape, and act as a removable barrier. It turned out quite well.