I have completed the wiring of the alarm system. With all the black wire-loom, it looks like something from a sci-fi movie. I have also started painting the dash support pieces to match the rest of the interior trim.
I have completed the installation of the custom junction box to the Fiero chassis. This will allow easy electrical hookup for the aftermarket accessories.
I attached 18 gauge metal tabs to the back of the dash – I used 22 gauge metal before, but the screws were stripping it too easily. I also attached tabs to mount the speakers and speaker covers. JB weld was used to secure the metal to the fiberglass.
I spent the last three hours adding additional support for the fiberglass center console – a.k.a. the armrest. It involved fabricating a metal bracket and a fiberglass ledge. I also mounted the shifter boot – this boot is just used as a mock-up. I have a nice Rodney Dickman leather boot that will take it’s …
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| « Apr | ||||||
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 7 | 8 | 9 | 10 | 11 | 12 | 13 |
| 14 | 15 | 16 | 17 | 18 | 19 | 20 |
| 21 | 22 | 23 | 24 | 25 | 26 | 27 |
| 28 | 29 | 30 | 31 | |||