Our fridge has an automatic ice maker and a filtered water dispenser. Having done this before, I wanted to make this install as CLEAN as possible. So the steps involved are: Buy an ice-maker/water-line kit from your local hardware store and pick a spot behind the fridge to install the line; Optional – I used …
I have re-attached the Fiero seat brackets. They are ready to go back in the car after being out almost 3 years!! I also sandblasted the seat bolts – they were a bit too “rusty” for the new interior.
Since the original tabs were broken on the speaker covers, I came up with a new way of attaching them to the interior “A” pillar piece. Home Depot sells these nylon based nuts and bolts. With a black coat of paint, they fit right in.
The ducts were secured to the fiberglass dash using something called a Chicago nut/bolt fastener – they are also called barrel nuts/bolts. They have a very low profile, so it won’t interfere with the upholstery or the trim pieces. The couplers I glassed in are being used to connect a 2.5″ hose for the HVAC …